Product Key Features - HIKVISION 7600NI-SE Series User Manual

User Manual of DS-7600NI Series NVR

Product Key Features

General

Connectable to network cameras, network dome and encoders.

Connectable to the third-party network cameras like AXIS, Brickcom, Bosch, PANASONIC,
SAMSUNG and SANYO, and network cameras that adopt ONVIF or PSIA protocol.

PAL/NTSC adaptive video inputs.

Each channel supports dual-stream.

Up to 16 network cameras can be connected.

Independent configuration for each channel, including resolution, frame rate, bit rate, image quality,
etc.

The quality of the input and output record is configurable.
Local Monitoring

Simultaneous HDMI and VGA outputs.

HDMI output and VGA output at up to 1920× 1080 resolution.

Multiple screen display in live view is supported, and the display sequence of channels is adjustable.

Live view screen can be switched in group, and manual switch and automatic cycle live view are also
provided, and the interval of automatic cycle can be adjusted.

Quick setting menu is provided for live view.

Motion detection, video tampering, video exception alert and video loss alert functions.

Privacy mask.

Multiple PTZ protocols supported; PTZ preset, patrol and pattern.

Zooming in by clicking the mouse and PTZ tracing by dragging mouse.
HDD Management

Up to 2 SATA hard disks can be connected. (Each disk with a maximum of 4TB storage capacity.)

8 network disks (8 NAS disks, or 7 NAS disks+1 IP SAN disk) can be connected.

Support S.M.A.R.T. and bad sector detection.

HDD group management.

Support HDD standby function.

HDD property: redundancy, read-only, read/write (R/W).

HDD quota management; different capacity can be assigned to different channel.
Recording and Playback

Holiday recording schedule configuration.

Continuous and event video recording parameters.

Multiple recording types: manual, normal, alarm, motion, motion | alarm, motion & alarm.

8 recording time periods with separated recording types.

Pre-record and post-record for alarm, motion detection for recording, and pre-record time for
schedule and manual recording.

Searching record files by events (alarm input/motion detection).

Tag adding for record files, searching and playing back by tags.

Locking and unlocking record files.

Local redundant recording.

Searching and playing back record files by channel number, recording type, start time, end time, etc.

Smart search for the selected area in the video.
6