Channel Display Settings - HIKVISION Network Digital Video Recorder User Manual

User Manual of Network Video Recorder

10.1 Channel Display Settings

Note: This function is only supported by IP cameras from certain manufacturers.
Steps:
1. Enter OSD settings interface:
Configuration> Remote Configuration> Camera Settings> Display Settings
2. Select the channel No. for Display Settings, and you can configure the Camera Name.
3. Check the corresponding checkbox to enable the function.
4. Select the Date Format, Time Format and Display Mode.
You can use the mouse to click and drag the text frame on the live view window to adjust the OSD position
5. You can check the corresponding checkbox to copy the settings to other camera(s).
6. Click Save button to save the settings.
Figure 10. 1 Display Settings Interface
72