Schedule Recording And Capturing - HIKVISION Network Digital Video Recorder User Manual

User Manual of Network Video Recorder

6.2 Schedule Recording and Capturing

Note: In this section, we take the record schedule procedure as an example, and the same procedure can be
applied to configuring schedule for both recording and capture. To schedule the automatic capture, you need
to choose the Capture tab in the Schedule interface.
Steps:
1. Enter Schedule Settings interface:
Configuration> Remote Configuraion> Camera Settings> Schedule Settings
2. Select the camera to configure the record schedule.
3. Check the checkbox of Enable Record Schedule.
Note: When NVR succeeds to connect to IP camera, it will start schedule recording which means recording
for 24*7 hours by default.
4. Click Edit button to enter setup page.
1) Choose the day in a week to configure scheduled recording.
Figure 6. 1 Schedule Recording Configuration
Figure 6. 2 Schedule Editing Interface
31