Hdd Sleeping - HIKVISION Network Digital Video Recorder User Manual

User Manual of Network Video Recorder
Steps:
1. Check the checkbox of disk.
2. Configure its property by selecting R/W, Read-Only or Redundancy from drop-down menu.
3. Click the Set button to save the settings.
Parameter
Writing in and reading from this disk is allowed when selecting this option.
R/W
Unable to write in this disk to protect existed recordings from being overwritten
Read-Only
when selecting this option.
Redundant recording in this disk is allowed when selecting this option to double
Redundancy
secure the data.
Note: Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a particular
HDD group through HDD settings. You can refer to the User Manual of iVMS-4200 for detailed information.

12.1.3 HDD Sleeping

Purpose:
The HDD sleeping function can switch the HDD into sleeping status to reducing the consumption when there is no
need to read or write.
Steps:
1. Enter HDD Advanced Settings interface.
Configuration> HDD Management > Advanced
2. Check the checkbox of Enable HDD Sleeping and click the Save button.
Table 12. 1 Disk Property Description
Figure 12. 3 HDD Sleeping Setting
92
Description