Recording And Capturing; Manual Recording And Capturing; Schedule Recording And Capturing - HIKVISION DS-9508NIST Quick Operation Manual

Quick Operation Guide of Network Video Recorder
By default, one-touch configuration adopts background initialization to initialize the RAID. By using
background initialization, the virtual disk can be used immediately.
6. You can see the information of the virtual disk in the HDD Information interface.

Recording and Capturing

Manual Recording and Capturing

Purpose:
You can manually trigger recording and capturing via the web browser, and the recording files and captured
picture will be saved in the local directory of your PC. Please refer to the User Manual for details of setting default
saving directory.
Before you start:
The channel for recording and capturing should be in the live view mode.
When the live view of the current channel is stopped, the recording or the capturing of this channel will be
stopped as well.
Manual Recording
Click icon to start recording of this channel. If the icon does not change to
"Recording failed". When the recording is on, click
When multiple channels are in live view mode, you may click
to stop recording for all the channels.
If the free disk space is less than 500M, the web server will stop recording automatically.
Manual Capturing
Select a live view window, and click
When the free disk space is less than 500M, capture image will be failed.

Schedule Recording and Capturing

In this section, we take the record schedule procedure as an example, and the same procedure can be
applied to configuring schedule for both recording and capturing. To schedule the automatic capture,
you need to choose the Capture tab in the Schedule interface.
Steps:
1. Enter Schedule Settings interface:
Configuration> Remote Configuraion> Camera Settings> Schedule Settings
2. Check the checkbox of Enable Record Schedule.
to stop recording.
to start recording for all the channels, or click
to capture image.
19
, it will pop up note message