Operation; Gentle Cool Air; Plasmacluster - Sharp AH-PN10 Operation Manual

GENTLE COOL AIR

The vertical airflow louvre is set obliquely
upward to deliver cool air to the ceiling in
order to avoid direct airflow.
1
During operation, press the
GENTLE COOL AIR button.
• The remote control will display "
TO CANCEL
Press the GENTLE COOL AIR button
again.
NOTE:
• If you want GENTLE COOL AIR operation
in POWERFUL JET mode, press GENTLE
COOL AIR button during POWERFUL JET

operation.

OM_AH-PN10 13GY_EN.indd Sec1:8 OM_AH-PN10 13GY_EN.indd Sec1:8
PLASMACLUSTER OPERATION
(AH-PN10, AH-PN10-GY
AH-PN13, AH-PN13-GY
AH-PN19, AH-PN24 ONLY)
Plasmacluster ions released into the room
will reduce some airborne mold.
".
1
During operation, press the
PLASMACLUSTER button.
• The remote control will display "
• The blue PLASMACLUSTER lamp (
will light up.
TO CANCEL
Press the PLASMACLUSTER button
again.
• The blue PLASMACLUSTER lamp (
will turn off.
1
NOTE:
• Use of the PLASMACLUSTER operation will
be memorized, and it will be activated the next
time you turn on the unit.
• To perform Plasmacluster operation in FAN
only mode, press the PLASMACLUSTER but-
ton when the unit is not operating.
The mode symbol of the remote control will go
off and the fan speed cannot be set to AUTO.
E-8
".
)
)
1
12/22/11 6:30:18 PM 12/22/11 6:30:18 PM