Quick Start - Alto LYNX-MIX USB SERIES User Manual

3. QUICK START

This is the fastest way to get something out from your L YNX-MIX USB
have a keyboard and a microphone.
a. Plug the microphone into Channel 1 MIC IN.
b. Turn down AUX and LEVEL controls on the input channel.
c. Put the EQ controls on center position.
d. Turn on your LYNX-MIX USB mixer.
e. Sing or speak into the microphone with normal volume and adjust the channel
LEVEL control of half.
f. If you like, you can adjust the EQ at this stage.
g. The LED on the Master LED meter should flash only occasionally, otherwise you
will hear distortion. If this LED is not active and you still hear distortion, please
turn down a little the input LEVEL control or reduce the output level of your
source instrument.
h. Connect your stereo keyboard into one of the s
LYNX-MIX USB mixer.
Here you are. It is your first GIG with your L YNX-MIX USB Series.
tereo line inputs
series , if you
channel of your
5