Quick Start - Alto PBM4D User Manual

3. QUICK START

This is the fastest way to get something out from your PBM4D SISTEMA, if you have
a keyboard and a microphone.
a. Well, there is not really much to say before starting to operate the PBM4D SISTEMA.
It includes Mixer , Amplifiers and Speakers, so just put it on a clean table first and
make sure that the Power switch on the back panel is on OFF position.
b. Turn down the Input Channel Gain Controls and the MAIN and MONITOR controls.
c. Keep Input Channel EQ and Master EQ controls in center position.
d. Only at this point you can connect the AC cable into an AC socket and you can
switch the system ON.
e. Now connect a microphone into Channel 1-3 or a Line Instrument into Channel 4.
f. Slowly turn up the Input Channel LEVEL Control and then the MAIN Control.
g. For an optimal sound reproduction make sure that the -10 and 0 LEDs on the
Master LED Meter are blinking.
Here you are. It is your first gig with your PBM4D SISTEMA..
3