Alto LYNX-MIX USB SERIES User Manual page 15

after the Level control, otherwise, release the button will output the soloed
signal before the Level control.
NOTE: The SOLO function can never affect the mix at main recording output,
and also can't be affected by channel's MUTE switch.
35 EQ Switch
Engage this button to add the stereo graphic EQ to the main mix output circuit.
It can be used to modify the frequency "contour" of a sound. If you release the
button, the stereo graphic EQ will be bypassed.
36 STEREO GRAPHIC EQ
Each one of these faders will boost or attenuate (+/-15 dB) the selected frequency
at a preset bandwidth. When all the faders are in the cent r position, the output
of the equalizer is flat response.
35
36
DSP SECTION
There is a powerful 24-bit/256 preset multi-effects included in your LYNX-MIX USB
Series. Effects include reverbs, chorus, flanger, delay and combinations of the above.
37 PRESETS
Adjust this knob to select the right effect you wish to perform. There are a
total of 16 options for you: several kinds of reverb, mono and stereo delay,
effects with modulation, and versatile two-effect combination.
38 VARIATIONS
Since you have selected the preferable effect, the next step, please go with the
fine consideration, there are also a total of 16 variations for each preset, and
each variation may be managed by several different factors.
4. CONTROL ELEMENTS
e
13