Sub-Zero 601R-2 Technical & Service Manual page 162

Built-in (600-2) series
Hide thumbs Also See for 601R-2:
Table of Contents

Advertisement

Technical Data
Model 650G-2
CHARGE (R-134a Refrigerant)
NOTE: Always check serial tag for exact charge
NORMAL OPERATING PRESSURES
COMPRESSOR
NOTE: Always check current parts price list for
possible substitutions.
Original Compressor / Service Compressor Amps
Original Compressor / Service Compressor BTU's
DEFROST METHOD
DEFROST TERMINATOR
DEFROST HEATER
DRAIN TUBE HEATER
DRAIN TROUGH HEATER
FILL TUBE HEATER
WATER VALVE
THERMISTORS
(Evap & Compartment)
DOOR HEATER
#3758407 - Revision B - August, 2006
Built-In
Built-In
(600-
(600-
REFRIGERATOR
Low Side
High Side
Service Part No.
Manufacturer
Mfg. Part No.
Cut-In Temp.
Cut-Out Temp.
Watts
Amps
Ohms
Watts
Amps
Ohms
Watts
Amps
Ohms
Watts
Amps
Ohms
Watts
Amps
Ohms (Inductive)
Ohms at 32°F / 0°C
Watts
Amps
Ohms
9-10
Series
Series
2
2
)
)
4.5 oz.
5-12 psi to 35-42 psi
1-3" vacuum to 8-15 psi
85 psi to 100 psi
4201880
Embraco
EMI30HER
0.6 / 1.1
345 / 280
"Off Cycle Defrost"
Evap > 38°F before
Intervals and duration
Compressor ON.
varies. Followed by 5
min. compressor delay.
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
30000 - 33000
5
.04
2500 - 2950
FREEZER
6.0 oz.
75 psi to 90 psi
4202280
Embraco
EMI60HER
0.8 / 1.9
605 / 585
"Adaptive Defrost"
30°F / -1°C
55°F / 13°C
640
5.5
19 - 23
----
----
----
----
----
----
4.2
.04
3000 - 3500
50
.4
160
30000 - 33000
----
----
----

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 601R-2 and is the answer not in the manual?

Questions and answers

Ned Thanhouser
February 22, 2025

How do I adjust defrost cycle temperature in refrigerator 601R? Currently goes to 56 degrees.

1 comments:
Mr. Anderson
February 22, 2025

The defrost cycle temperature in the Sub-Zero 601R refrigerator is controlled by the defrost terminator. For model 601F-2, the defrost terminator cut-in temperature is 30°F (-1°C), and the cut-out temperature is 70°F (21°C). If adjustment is needed, check for proper operation of the defrost terminator and replace it if defective. There is no manual adjustment for these temperatures.

This answer is automatically generated

Subscribe to Our Youtube Channel

Table of Contents

Save PDF