Menu ( "Set" ) Mode - Standard Horizon HX100 Owner's Manual

7. MENU ( "SET" ) MODE

The HX100/HX150's Menu Mode allows a number of the HX100/HX150 op-
erating parameters to be custom-configured.
The Menu Mode is easy to activate and set, using the following procedure:
1. Turn the transceiver off by press and holding the
2. Press and hold the
ceiver while still holding down the
3. After "SET" icon appears on the display let go of both
keys.
4. The key when pressed scrolls through each menu
item:
LP - Lamp mode,
bP - key beep,
SC - Scan Mode,
dt - Dual watch or Tri-Watch mode,
AL - Weather alert
5. Press the
item.
6. Press the
7. After completing your adjustment, turn the transceiver off and on by
pressing and holding the
LP ( LAMP MODE )
Function: Selects the Lamp illumination method for the LCD/Keypad.
Available Values: on / ky / oF
Default: kEY
on: Illuminates the LCD/Keypad continuously.
ky: Illuminates the LCD/Keypad for 5 seconds when any key is pressed.
oF: Turns off the backlight for the LCD and keys.
bP ( BEEP )
Function: Enable/Disable the Keypad beeper.
Available Values: HI / Lo / oF
Default: HI
SC ( SCAN TYPE )
Function: Selects the Scan mode.
Available Values: PS (Priority Scan) / MS (Memory Scan)
Default: PS (Priority Scan)
HX100/HX150
key, and then turn on the trans-
or key will change the selection of the selected menu
key to save the menu selection.
key.
key.
key.
Page 31