Menu "Set" Mode - Standard Horizon HX290 Owner's Manual

7. MENU "SET" MODE

The HX290's Setup Menu allows a number of the HX290 operating param-
eters to be custom-configured for your operating requirements.
The Setup Menu is easy to activate and set, using the following procedure:
1. Turn the transceiver off by rotating the VOL knob fully counter-clockwise.
2. Hold down the
still holding down the
3. " " will appear on the display, indicating the Menu
("Set") Mode has been activated.
4. Press the
5. Press the
lected Menu item.
6. Press the
Menu item.
7. After completing your adjustment, turn the transceiver
off and on by rotating the VOL knob.
Page 26
key, then turn on the transceiver while
key.
key to select the Menu item to be adjusted.
or key to enable adjustment of the se-
key to select the status or value of the
HX290