Preset Channels ( 0 ~ 9 ) : Instant Access; Programming; Operation; Deleting A Preset Channel - Standard Horizon HX100 Owner's Manual

Wednesday sometime between 11 AM and 1 PM local time. You may use this
opportunity to test your transceiver periodically to confirm that the Weather
Alert feature is working, or for training crew members on how to configure
the transceiver to receive the NOAA Weather Alerts.

6.8 PRESET CHANNELS ( 0 ~ 9 ) : INSTANT ACCESS

Ten user assigned channels can be programmed for instant access. Pressing
the key activates the user assigned channel bank (Preset Channel Bank).

6.8.1 PROGRAMMING

1. Select the desired channel to be assigned into the Pre-
set Channel Bank using the
2. Press and hold the
blinks at the left of the channel number on the display.
3. Press the
Channel (" P0 " ~ " P9 ").
4. Press the
nel Bank.
5. Repeat steps 1 through 4 to program the other channel into Preset Chan-
nels, if desired.

6.8.2 OPERATION

1. Press the
"PRESET" icon and Preset Channel Number will ap-
pear on the display.
2. Press the
Channel (" P0 " ~ " P9 ").
3. Press the
channel. The "PRESET" icon will disappear from the display.

6.8.3 Deleting a Preset Channel

1. Press the
2. Press the
to be deleted.
3. Press and hold the
blinking.
4. Press and hold the
is deleted from the Preset Channel list.
5. Repeat steps 2 through 4 to delete the desired chan-
nels from Preset Channels " P0 " ~ " P9 ".
6. To finish the deleting the Preset Channel, press the
turn to the last selected normal channel.
Page 26
key until the "PRESET" icon
or key to select the desired Preset
key to program the current channel into the Preset Chan-
key to recall the Preset Channel. The
or key to select the desired Preset
key again to return to the last selected
key to recall the Preset Channel.
or key to select the Preset Channel
key until the "PRESET" icon is
key until the selected channel
or key.
key again to re-
HX100/HX150