Tri-Watch - Standard Horizon HX100 Owner's Manual

6.11 TRI-WATCH

You may change the Dual Watch feature to Tri-Watch via the Menu ("Set")
Mode. Refer to Menu Mode Item "dt ( DUAL WATCH MODE ) " on page 33 for
details.
The Tri-Watch scans Channel 16, 9, and one other channel. When enabled,
a "TW" icon will appear on the display when the Dual Watch feature is acti-
vated.
1. Press the
9 and 16.
2. Press and hold the
the TRI-Watch feature. "TW" icon will appear on the
display when the Tri-Watch feature is activated.
3. When a transmission is received on the channel 16,
HX100/HX150 will stay on the channel 16 until the
incoming signal disappears.
4. When a transmission is received on the channel 9, the
HX100/HX150 will Dual watch between the channel 16
and channel 9.
5. When the HX100/HX150 receives a transmission on
the working channel, the HX100/HX150 will Tri-watch
between the working channel, channel 16, and channel
9.
6. To stop the Tri-watch feature and return to normal operation, press the
key.
Page 30
/ key to select the channel to scan along with Channel
key for two seconds to activate
t W
ri atch
HX100/HX150