Menu "Set" Mode - Standard Horizon HX380 Owner's Manual

7. MENU "SET" MODE

The HX380's Menu Mode allows a number of the HX380 operating param-
eters to be custom-configured for your operating requirements.
The Menu Mode is easy to activate and set, using the following procedure:
1. Turn the transceiver off by rotating the VOL knob fully counter-clockwise.
2. Hold down the [ SQL ] key, and then turn on the transceiver while still hold-
ing down the [ SQL ] key.
3. The Menu item will scroll at the upper left corner of the display and its
current status or value will appear on the display.
4. Press the [ ] or [ ] key to select the Menu item to be adjusted.
5. Press the [ SQL ] key to enable adjustment of the selected Menu item. The
current status or value will blink.
6. Press the [ ] or [ ] key to select the desired status or value of the Menu
item.
7. After completing your adjustment, press the [ CLR ] key to save the new
setting.
8. If you wish to change other Menu item, repeat steps 4 to 7 above.
9. Press the [ H/L (
BEEP LEVEL
Function: Enable/Disable the Keypad beeper.
Available Values: HI / Lo / oFF
Default: HI
LAMP MODE
Function: Selects the Lamp illumination method for the
LCD/Keypad.
Available Values: KEY / Cnt (Continuous) / oFF
Default: KEY
KEY:
Cnt (Continuous): Illuminates the LCD/Keypad continuously.
oFF:
SCAN LAMP
Function: Enables/Disables the Scan Lamp while scan-
ner is paused.
Available Values: on / oFF
Default: on
Page 24
)] key to exit to normal operation.
Illuminates the LCD/Keypad for 5 seconds when any key is
pressed.
Turns off the backlight for the LCD and keys.
HX380