Standard Horizon HX100 Owner's Manual page 18

Keypad
Key
Press the
cation. Press and hold the
Press the 16/9 again reverts the transceiver back to the previously se-
lected working channel.
Key
Press to stop the Scan, Priority Scan, Dual or Tri-Watch feature.
Secondary use:
Press and hold the
(National Oceanic and Atmospheric Administration) Weather Channel
from any channel location. Press the
ously selected working channel.
Advanced use:
When the
change the marine band between the USA, International, and Canadian
channels.
Key
Press key to toggle the transmitter output power between "High"
(5 Watts; HX150, 2.5 Watts; HX100) and "Low" (1 Watt) power. The
key does not function on the "Transmission Inhibited" and "Low power
only" channels.
Secondary use:
Hold down
keys) so that they are not accidentally changed. The "
will appear at the top left on the display, to indicate that the functions are
locked. Hold down
lock the radio.
Key
Press key to change the operating channel, receiver volume level,
and squelch threshold level.
Pressing the
one step. Holding the
Key
Press key to change the operating channel, receiver volume level,
and squelch threshold level.
Pressing the
one step. Holding the
Page 18
key to immediately recall channel 16 from any channel lo-
key for two seconds to recall the last-used NOAA
key is held and the
key to lock the keypad (except the
key until the "
key momentarily, the channel (or level) will increase
key, the channel (or level) will increase rapidly.
key momentarily, the channel (or level) will decrease
key, the channel (or level) will decrease rapidly.
key for two seconds to recall channel 9.
key again to recall the previ-
key is pressed, the radio will
" Keylock icon disappears to un-
, and PTT
" Keylock icon
HX100/HX150