Menu "Set" Mode - Standard Horizon HX280E Owner's Manual

7. MENU "SET" MODE

The HX280E's Menu Mode allows a number of the HX280E operating param-
eters to be custom-configured for your operating requirements.
The Menu Mode is easy to activate and set, using the following procedure:
1. Turn the transceiver off by rotating the VOL knob fully counter-clockwise.
2. Hold down the [ SQL ] key, and then turn on the trans-
ceiver while still holding down the [ SQL ] key.
3. " " will appear on the display, indicating the Menu
("Set") Mode has been activated.
4. Press the [ SQL ] key to select the Menu item to be ad-
justed.
5. Press the [
selected Menu item. The menu item will blink.
6. Press the [ SQL ] key to select the status or value of the
Menu item.
7. After completing your adjustment, turn the transceiver
off and on by rotating the VOL knob.
LP ( LAMP MODE )
Function: Selects the Lamp illumination method for the LCD/
Keypad.
Available Values: on / kEY / oFF
Default: kEY
on: Illuminates the LCD/Keypad continuously.
kEY: Illuminates the LCD/Keypad for 5 seconds when any key is pressed.
oFF: Turns off the backlight for the LCD and keys.
bP ( BEEP )
Function: Enable/Disable the Keypad beeper.
Available Values: HI / Lo / oFF
Default: HI
SC ( SCAN TYPE )
Function: Selects the Scan mode.
Available Values: PS (Priority Scan) / MS (Memory Scan)
Default: PS (Priority Scan)
HX280E
] or [ ] key to enable adjustment of the
Page 23