Battery Charging - Standard Horizon HX100 Owner's Manual

4.2.3 BATTERY CHARGING

1. Turn the transceiver off.
2. Insert the DC plug from the PA-48B into
the DC jack on the CD-56 (for HX100)
or CD-57 (for HX150) Charging Cradle,
then plug the PA-48B into the AC line
outlet.
3. Insert the HX100 or HX150 (with the bat-
tery pack) into the CD-56 (for HX100) or
CD-57 (for HX150); the antenna should
be at the left side when viewing the
charging cradle from the front.
4. If the transceiver and battery pack are
inserted correctly:
HX100: The RED indicator on the CD-56
will glow.
HX150: The "
display.
5. A fully-discharged pack will be charged
completely in approximately 10 hours
(for HX100) or 6 hours (for HX150). The
HX150 is completely charged when the
" " disappears and "FL" for FULL ap-
pears on the LCD display.
6. Remove the transceiver(s) from the CD-56 or CD-57, then unplug the
PA-48B from the AC line outlet.
 Do not connect an improper battery charger to the DC jack on the
CD-56 and CD-57 Charging Cradle.
 The PA-48B, CD-56 and CD-57 are not designed to be water-
proof. Do not attempt to charge in a water hazardous environment.
Please dry the transceiver and charge contacts using a soft cloth
before charging.
HX100/HX150
" icon will appear in the
CAUTION
HX100
PA-48B
CD-56
HX150
PA-48B
CD-57
Page 15