Scanning; Programming Scan Memory; Selecting Scan Type - Standard Horizon HX100 Owner's Manual

Floating vhf marine transceiver
Table of Contents

Advertisement

6.9 SCANNING

The HX100/HX150 allows the user to select the scan type from "Memory
Scan" or "Priority Scan". "Memory Scan" scans the channels that were pro-
grammed into Scan Memory and also channels stored in the Preset Channel
(" P0 " ~ " P9 "). "Priority Scan" is similar to the "Memory Scan" scan, however
it scans the priority channel (channel 16) and dual watches to channels pro-
grammed in memory scan and preset channel memory. When an incoming
signal is detected on one of the channels during scan, the radio will pause on
that channel, allowing you to listen to the incoming transmission.

6.9.1 PROGRAMMING SCAN MEMORY

1. Turn the transceiver off by pressing and holding the
2. Press and hold the
ceiver while still holding down the
will appear on top right of the display.
3. Press the
be scanned, then press the
pears on the display, which indicates the channel has
been selected to the scan channel.
4. Repeat step 3 for all desired channels to be programmed into scan mem-
ory.
5. To DELETE a channel from the scan memory, select the channel by
pressing the
disappear from the display.
6. When you have completed programming scan memory, turn the trans-
ceiver off and on by press and holding the

6.9.2 SELECTING SCAN TYPE

1. Turn the transceiver off by press and holding the
2. Press and hold the
holding down the
3. "SET" icon will appear on the display, indicating the
Menu ("Set") Mode has been activated.
4. Press the
of the display.
5. Press the
or " MS (Memory Scan)". The factory default is " PS (Pri-
ority Scan)".
Priority Scan: Scans the Scan Memory Channel, Pre-
HX100/HX150
key, and then turn on the trans-
or
key to select desired channel to
or
key, then press the
key, and then turn on the transceiver while still
key.
key until " SC " is shown in the bottom right
or
key to select " PS (Priority Scan)"
set Channel, and the Priority Channel
(Channel 16).
key. "SET" icon
key. The "M" icon ap-
key.
key.
key. The "M" icon will
key.
Page 27

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hx150

Table of Contents