Table of Contents
Advertisement
Absence mode
In COOL mode, there is no Frost Protection set point.
The system will be shut down for the programmed
time.
This mode lets you place your home under Frost
Protection if you need to leave for several days.
Turn the knob to
.
Adjustment of the number of days (1 to 365)
E.g. For a departure on 1 March and a
return on 16 March, program 15 days
of absence.
Automatic operation will resume on
16 March at midnight.
Confirm
Set-point temperature setting
(from 5 to 15°C)
Confirm and
start the calendar
countdown.
To make changes to the current
mode
, press OK once more.
To cancel the current mode
turn the knob.
Return to
AUTO mode at the
end of the countdown
,
- 8 -
Off Mode
This mode shuts down your system.
Turn the knob to
.
Room
temperature
HEAT / COOL mode principle
(Can only be used with a reversible heat pump: heat
mode / cool mode).
In winter:
set the system to HEAT mode.
In summer:
set the system to COOL mode.
Set-point
Modes
temperatures
Economy
(if you are absent)
Comfort
(if you are at home)
In mid-season (Spring / Autumn):
set the system to off mode.
Configuration
menu access
button (press
and hold for
5 seconds)
HEAT mode
COOL mode
(In winter)
(In summer)
E.g. 16°C
E.g. 27°C
E.g. 19°C
E.g. 24°C
- 9 -
Hide quick links:
Advertisement
Table of Contents
