D-Link DSA-6100 User Manual page 9

Wireless access controller
Table of Contents

Advertisement

Chapter 2. Overview
The following picture provides a simple example of setting up middle to large enterprise network. The DSA-6100 is
set to control a part of the company's intranet. The whole managed network includes cable network users, and
wireless network users. In the beginning, any user located at the managed network is unable to access the
network resource without permission. If the access right to the network beyond the managed area is required, an
Internet browser such as the Internet Explorer must be opened and a connection to any website must be
performed. When the browser attempts to connect to a website, the DSA-6100 will force the browser to redirect to
the user login webpage. The user must enter the username and password for authentication. After the identity is
authenticated successfully, the user will be granted proper access right as defined in the DSA-6100.
Attention: Public LAN is referred to as the LAN port with the authentication function enabled from where the
Authentication is required for the users to get access of the network. Private LAN is referred to as the LAN port
with the authentication function disabled.
3

Advertisement

Table of Contents
loading

Table of Contents