Table of Contents
Advertisement
interoperability with IEEE 802.11b.
o Mixed: Select when using 802.11b and 802.11g wireless device.
o 802.11g Only: Select when using all 802.11g wireless device.
o 802.11b Only: Select when using all 802.11b wireless device.
Preamble: Select Long Only or Short and Long. A short preamble is recommended for high-traffic
networks.
Connection Settings:
Multi-SSID: Multiple Service Set Identifier. Select either Disabled, Multi-SSID with VLAN or
Multi-SSID without VLAN.
Load Balance: When enabled, you allow several APs to balance wireless network traffic and
wireless clients among APs in the networks. Assign each access point a different non-overlapping
channel.
User Limit: Enter the number of the limit of load balancing users from 0~64.
o
Link Integrate: Disable or Enable this feature.
Antenna Diversity: Radio is connected to each antenna and supports auto diversity mode by
default. The access point will auto switch to the antenna with better RSSI value.
Diversity: The AP will auto switch to the antenna with better RSSI value.
o
Left Antenna: The AP will not switch antenna and the radio will use the left antenna to transmit
o
and receive packets.
Right Antenna: AP won't switch antenna and the radio will use the right antenna to transmit and
o
receive packets.
Multi-SSID Settings: Select Disabled, Multi-SSID with VLAN or Multi-SSID without VLAN. While
Multi-SSID enabled, Super G Mode will be disabled automatically. While selecting Multi-SSID with VLAN,
Multi-SSID settings could configure up to multiple SSID. Click Configure button to setup SSID Configuration,
the information of SSID, Broadcast SSID, WMM and Security.
DSA-6100 User Guide
68
Advertisement
Table of Contents
