Table of Contents
Advertisement
DSA-6100 User Guide
Selecting the Filter Rule Item 1:
Rule Item: This is the rule selected.
Rule Name: The rule name can be changed here.
Enable this Rule: After checking this function, the rule will be enabled.
Action: There are two options, Block and Pass. Block is to prevent packets from passing and
Pass is to permit packets passing.
Protocol: There are three protocols to select, TCP, UDP and ICMP, or choose ALL to use all
three protocols.
Source MAC Address: The MAC address of the source IP address. This is for specific MAC
address filter.
Source/Destination Interface: There are four interfaces to choose, WAN1, WAN2, LAN1 and
LAN2.
Source/Destination IP: Enter the source and destination IP addresses.
Source/Destination Subnet Mask: Enter the source and destination subnet masks.
102
Advertisement
Table of Contents
