Local Server - D-Link DSA-6100 User Manual

4.4.1.1

Local Server

This server is only for "Local User" and the authentication method can not be changed for this server which
manages user accounts on lists of the local user setting.
Choose "Local Server" in the Server Name field, the hyperlink beside the pull-down menu will become setting of
"Local Server".
Server Name: Set a name for the server using numbers (0~9), alphabets (a~z or A~Z), dash (-), underline (_)
and dot (.) with a maximum of 40 characters, all other letters are not allowed.
Sever Status: The status shows that the server is enabled or disabled.
Postfix: Set a postfix that is easy to distinguish (e.g. Local) for the server using numbers (0~9), alphabets
(a~z or A~Z), dash (-), underline (_) and dot (.) with a maximum of 40 characters, all other letters are not
allowed.
Warning: The Postfix Name cannot contain these words: MAC and IP.
Blacklist: There are five sets of the black lists. Select one of them or choose "None". Please refer to 4.4.3
Black List Configuration.
Local User Account: Click the Local User Setting hyperlink to set the further configuration.
Policy Name: There are ten policies to choose from to apply to this particular server.
Clicking in the Local User Setting:
Edit Local User List: Click this to enter the "User List" screen. View, add, delete and backup user accounts.
Radius Roaming Out: Enable or disable roaming out. When enabled, this system becomes a RADIUS
server for other external RADIUS clients.
802.1x Authentication: Enable or disable 802.1x Authentication. When enabled, this system becomes a
RADIUS server for other external RADIUS clients as long as the RADIUS clients are configured accordingly.
DSA-6100 User Guide
80