Table of Contents
Advertisement
Chapter 4. Web Interface Configuration
Notice: If RADIUS Server does not assign idle-timeout value, DSA-6100 will use the local idle-timeout instead.
Class Mapping
In DSA6100, each authentication server can be associated with a policy.
The policy at this level is to provide a default policy value. Under a server, a different policy may be further
specified for a specific sub-group or a specific user to override the default policy.
For a RADIUS server, if a class mapping is enabled, a configuration page allows the mapping of RADIUS
class attributes to a policy on DSA-6100. If there is no policy chosen for a RADIUS Class attribute, the total
bandwidth for that RADIUS Class is bounded by the total bandwidth of the default policy of the authentication
server. If there is a specific policy selected for that RADIUS Class attribute, the total bandwidth of that class is
bounded by the total bandwidth of the chosen policy. The maximum bandwidth allowed for the users of a
class is also set in this page of RADIUS Class configuration.
89
Advertisement
Table of Contents
