Table of Contents
Advertisement
appropriate value of address based on the combination of Network/IP Address and Subnet
Mask that are just entered and applied.
Subnet Mask: The Subnet Mask of the destination network or just 255.255.255.255(/32) if the
destination is a single host.
IP Address (Gateway): The IP address of the next router to the destination.
Default: Select the check box to activate the routing rule as the default route.
Schedule Profile: Click the hyperlink of Setting for Schedule Profile to enter the Schedule Profile list.
Select "Enable" to show the list. This function is used to restrict the time the users can log in. Please
enable/disable the desired time slot and click Apply to save the settings (on the screen below is shown
only for 0 to 10, but the system can be configured based on 24 hours). These settings will become
effective immediately after clicking the Apply button.
Bandwidth: Use the drop-down list to select the maximum bandwidth for the users who are assigned to
this policy.
Chapter 4. Web Interface Configuration
107
Advertisement
Table of Contents
