Table of Contents
Advertisement
Selecting the Filter Rule Item 1:
Rule Item: This is the rule selected.
Rule Name: The rule name can be changed here.
Enable this Rule: After checking this function, the rule will be enabled.
Action: There are two options, Block and Pass. Block is to prevent packets from passing and
Pass is to permit packets passing.
Protocol: There are three protocols to select, TCP, UDP and ICMP, or choose ALL to use all
three protocols.
Source MAC Address: The MAC address of the source IP address. This is for specific MAC
address filter.
Source/Destination Interface: There are five interfaces to choose, ALL, WAN1, WAN2, LAN1
and LAN2.
Source/Destination IP: Enter the source and destination IP addresses. Domain Host filtering is
supported but Domain name filtering is not.
Source/Destination Subnet Mask: Enter the source and destination subnet masks which
Specific Route Profile: Click the hyperlink of Setting for Specific Route Profile, the Specific Route
Profile list will appear.
Profile Name: The profile name can be changed here.
Network/IP Address (Destination): The destination network address or IP address of the
destination host. Please note that, if applicable, the system will calculate and display the
DSA-6100 User Guide
106
Advertisement
Table of Contents
