D-Link DSA-6100 User Manual page 109

Specific Route Profile: Click the hyperlink of Setting for Specific Route Profile, the Specific Route
Profile list will appear.
Profile Name: The profile name can be changed here.
Network/IP Address (Destination): The destination network address or IP address of the
destination host. Please note that, if applicable, the system will calculate and display the
appropriate value of address based on the combination of Network/IP Address and Subnet
Mask that are just entered and applied.
Subnet Mask: The Subnet Mask of the destination network or just 255.255.255.255(/32) if the
destination is a single host.
IP Address (Destination): The destination IP address of the host or the network.
View System Route Table: Click the hyperlink View System Route Table to see the routing
information for the entire system.
VLAN Isolation Profile: Click the hyperlink of Setting for VLAN Isolation Profile, the VLAN Isolation
Profile list will appear. The isolation rules apply to all users including authenticated users,
non-authenticated users, privileged users, VPN users, users on a non-authenticated port, DMZ clients,
and virtual servers. While the system is not set in Bridge mode, the isolation rules will be displayed in
two tiers, a default rule accompanied by some exceptional rules.
Note: For more information, please refer to Appendix E. VLAN Isolation.
Chapter 4. Web Interface Configuration
103