4.3.3 Manual Configuration
The administrators who choose to configure an AP manually can utilize this page, in which provides several fields
to be filled in. The supported APs (such as DWL-2100AP) can also be added manually. Enter the related
information of the AP and select a Template. Click Add and then the AP will be added to the List. Similar to the AP
added after discovery, a manually added AP will show up with a status of "configuring" in the AP List initially. The
system will attempt to configure the AP with the value specified. A couple of minutes later, the AP's status will
become "online" or "offline" on the AP List.
AP Type: The type of supported AP.
AP Name: The mnemonic name of the specific AP.
Admin Password: The password of the AP for the system to access it.
IP Address: The IP address of the AP.
MAC Address: The Media Access Control (MAC) address of the AP.
Remark: The administrator can add some extra information for the AP in this field if desired.
Template Applied: The template which will be applied to the AP.
Channel: The RF channel to be used in the added AP.
DSA-6100 User Guide
60