Performing ActiveSync using the Cradle
To perform an ActiveSync operation for the first time using the cradle:
1. After installing the Windows ActiveSync software, restart your desktop computer.
2. Connect your CRD 7500 cradle to your computer by plugging the cable from the
cradle into the serial communications port on your computer.
Note: The CRD 7500 cradle requires a dedicated port. It cannot share a
port with an internal modem or other device. If you are unsure about
the exact location of the serial port on your computer, refer to the
user's manual supplied with the computer.
Figure 10-4. Connecting Cradle to Computer
Communications
10-5