S24 Network Settings
1. Select the S24 Network option. The S24 Network screen displays.
This screen allows you to define many of the Spectrum 24 network settings. Specifically,
you may define:
DHCP Enabled (Enable or Disable)
!
IP Address (if DHCP is disabled)
!
Subnet Mask (if DHCP is disabled)
!
Primary DNS
!
Secondary DNS
!
Primary WINS
!
Secondary WINS
!
Default Gateway
!
Secondary Gateway.
!
To modify the values in any of the fields, tap the field on the left-hand side of the screen.
Depending on the parameter, the system either scrolls through the list of valid values for
the field, or an entry screen displays, enabling you to enter the correct data via the
keypad. When the values in these fields are set as required, press the Enter key, then select
the Accept option on the pull down menu.
Figure 8-15. Spectrum24 Network screen
Spectrum24 Network Configuration
8-13