Chapter 5 Transferring Files To The Mk2200; Overview; Activesync; Installing Activesync - Symbol MK2200 MicroKiosk Product Reference Manual

Chapter 5
Chapter 5

Chapter 5 Transferring Files to the MK2200

Overview

Use the following tools to copy files to the MK2200:

ActiveSync

•
FTP Server (see
•
AirBEAM version 2.16 (see AirBeam Package Builder Product Reference Guide).
•
ActiveSync
The MK2200 communicates with a host computer using Microsoft
USB ActiveSync to transfer data between a host computer and the MK2200.
When installed on the MK2200, ActiveSync software allows copying and pasting (rather than synchronizing)
files between the MK2200 and host computer.
While an application is running, access to ActiveSync can be enabled or disabled using
NOTE
either RDM or the System Menu under System Configuration - ActiveSync -
EnableActiveSync.

Installing ActiveSync

To install ActiveSync on the host computer, download the latest version of the software from
http://www.microsoft.com. Refer to the installation instructions included with the ActiveSync software.
Use ActiveSync (version 3.7.1 or higher) to synchronize the information on the MK2200 with the information on
the host computer. Changes made on the MK2200 or host computer appear in both places after
synchronization.
The MK2200 implementation of ActiveSync 3.7.1 does not support ActiveSync Backup and
NOTE
Restore functionality and automatic information synchronization.
FTP Server on page 8-11)
Transferring Files to the MK2200
®
ActiveSync (version 3.7.1 or higher). Use