Setting Up The Crd 7500 Single And Four-Slot Cradles; Connecting Power - Symbol PDT 7500 Series Product Reference Manual

PDT 7500 Series Product Reference Guide for Windows
Setting Up the CRD 7500 Single and Four-Slot
Cradles
Setting up the single and four-slot cradle involves connecting power and connecting to a host
device.

Connecting Power

To connect power to the cradle:
1. Connect the power supply cable to the power connector on the back of the cradle.
2. Connect the power supply cable AC plug to a standard electrical outlet.
At power-up, the cradle's COM LEDs lights yellow for 3 seconds. The COM LEDs blink
seven times.
Power Connector (Single-Slot Cradle)
9-6
Power Connector (Four-Slot Cradle)
Figure 9-4. Connecting Power to the Cradles
®
CE