Symbol PDT 7500 Series Product Reference Manual page 132

PDT 7500 Series Product Reference Guide for Windows
3. Turn on the PDT 7500 terminal and slide it into the cradle.
The curved edge on the bottom of the PDT 7500 terminal should align smoothly
with the cradle when it is inserted properly.
4. Launch ActiveSync on your computer.
5. Select the Connection Settings option.
6. Check the Allow Serial Cable or Infrared Connection to this COM Port option.
7. Select Comm Settings from the Control Panel and set Port to "Com6 Cradle" (see
Communication Settings
Enter, and then exit Control Panel.
8. Select PC Link on the terminal.
9. ActiveSync detects the terminal and connects.
10-6
Figure 10-5. Inserting Terminal in Cradle
on page B-11). Press Enter, cursor down to "OK", press
®
CE