Symbol PDT 7500 Series Product Reference Manual page 75

3. Use the up and down cursor keys or the up and down arrows on the touch screen to
select the area to be received. You have the following options on this screen:
Prev. Menu
Single Image
Multiple Images
(default selection)
Boot Loader
Splash Screen
Windows CE Core
Platform Application Data Indicates the specific disk volume(s) to be received.
Exec
IPL
Partition Map
4. After selecting the area, press Enter. IPL checks for the presence of external power. If
the system is running off battery power, IPL displays the Connect to Power Screen:
5. Place the terminal in the cradle or connect the external power supply and serial
connection. IPL waits at this screen until external power is supplied. If the terminal
is already running from external power, this screen does not display. While this
screen is displayed, pressing Enter or the Cursor Up/Down keys on the keyboard
returns IPL to the Area Selection screen.
6. After the power and serial connections are made, the following screen displays:
Returns you to the Baud Rate menu to modify the baud rate.
Indicates that a single image is to be received, without specifying the area
to be received.
Indicates that more than one area is to be received contiguously.
Indicates that a new Boot Loader is to be received.
Indicates that a new splash screen is to be received.
Indicates that a CE Core is to be received.
For factory diagnostic use only.
For service use only.
Indicates that the partition map is to be received.
Insert in Cradle
Or
Connect Power Supply
Waiting for data
Multiple Images
115200
Configuring the Terminal
6-19