S24 Wep (Wired Equivalent Privacy) Configuration - Symbol PDT 7500 Series Product Reference Manual

PDT 7500 Series Product Reference Guide for Windows

S24 WEP (Wired Equivalent Privacy) Configuration

Note: Refer to the Access Point Product Reference Guide for additional
steps that may be required to complete the WEP configuration.
1. Select the S24 WEP Config option to display the S24 WEP Config screen.
Figure 8-16. Spectrum24 WEP Configuration Selection screen
This screen allows you to set the parameters for WEP.
Figure 8-17. Spectrum24 WEP Configuration screen
WEP Algorithm - Select None (Clear), Low (40 bit), or High (128 bit)
!
WEP Index - Select 1, 2, 3, or 4
!
8-14
®
CE