PDT 7500 Series Product Reference Guide for Windows
1. Prepare the mounting surface to accept four #8-32 studs in the pattern shown below.
Holes for studs
min. 0.1660 in. diameter
(min. 4.25 mm diameter)
Figure 9-6. Installation Pattern: VCD 7500 Vehicle Cradle
2. Install the cradle on the mounting surface.
a. Position the cradle on the mounting surface.
b. Fasten using the hardware supplied.
3. Connect the red and black power supply input leads to a fuse panel. A qualified
installer must perform the installation.
9-8
1.188"
1.500"
®
CE