Connecting To A Computer - Sanyo PLC-XE30 Owner's Manual

Installation

Connecting to a Computer

Cables used for connection
• VGA Cables (Mini D-sub 15 pin) (Only one cable is supplied.)
•USB Cable ✽
• Audio Cables (Mini Plug: stereo) ✽
(✽ = Not supplied with this projector.)
Audio Output
Audio cable
(stereo) ✽
✔
Note:
• Input sound to the COMPUTER / COMPONENT AUDIO IN
terminal when using the COMPUTER IN 1 / COMPONENT IN and
the COMPUTER IN 2/MONITOR OUT terminal as input.
• When connecting the AUDIO OUT to external audio equipment,
the projector's built-in speaker is disconnected.
• When the cable is of the longer variety, it is advisable to use the
COMPUTER IN 1 / COMPONENT IN and not the COMPUTER IN
2 / MONITOR OUT.
• See p65 for ordering optional parts.
16
USB port Monitor Output
USB cable ✽
VGA cable
COMPUTER IN 1/
USB
COMPONENT IN
USB SERVICE PORT COMPUTER IN 1
RESET
/ COMPONENT IN
C O M P U T E R /
COMPONENT
AUDIO IN
ON ON
http://www.pureglare.com.au
Monitor Output
or
Monitor Input
VGA cable
COMPUTER IN 2/
MONITOR OUT
This terminal is switchable. Set up the
terminal as either Computer input or
Monitor output. (See Page 45.)
(VARIABLE)
AUDIO OUT
R
COMPUTER IN 2 /
MONITOR OUT
COMPUTER /
L
VIDEO IN
COMPONENT
(MONO)
S-VIDEO IN
AUDIO IN
When connecting the cable, the power
cords of both the projector and the
external
disconnected from AC outlet.
External Audio Equipment
Audio Input
Audio cable ✽
(stereo)
AUDIO OUT
(stereo)
equipment should be