Air Circulation; Installing The Projector In Proper Position; Moving The Projector - Sanyo PLC-XE30 Owner's Manual

Safety Instructions

Air Circulation

Openings in the cabinet are provided for ventilation and
to ensure reliable operation of the product and to
protect it from overheating, and these openings must
not be blocked or covered.
CAUTION
Hot air is exhausted from the exhaust vent. When
using or installing the projector, the following
precautions should be taken.
Do not put any flammable object or spray can near
–
the projector, hot air is exhausted from the ventilation
holes.
– Keep the exhaust vent at least 3'(1m) away from any
objects.
– Do not touch a peripheral part of the exhaust vent,
especially screws and metallic part. This area will
become hot while the projector is being used.
– Do not put anything on the cabinet. The materials
put on the cabinet will not only get damaged but also
cause fire hazard by heat.
Cooling fans are provided to cool down the projector.
The fans' running speed is changed according to the
temperature inside the projector.
Exhaust Vent
(Hot air exhaust)
6
Exhaust Vent
Air Intake
Vent
Air Intake
Vent
http://www.pureglare.com.au
Installing the Projector
in Proper Position
Install the projector properly. Improper Installation may
reduce the lamp life and cause a fire hazard.
20˚
Do not tilt the projector more than
20 degrees from side to side.
20˚
Do not point the projector up to
project an image.
Do not point the projector down
to project an image.
Do not put the projector on either
side to project an image.

Moving the Projector

When moving the projector, replace the lens cover and
retract the adjustable feet to prevent damage to the
lens and cabinet. When the projector is not in use for
an extended period, put it into a suitable case to protect
the projector.
When handling the projector, do not drop, bump,
subject it to strong forces or put other things on the
cabinet.
USE CAUTION IN CARRYING OR
TRANSPORTING THE PROJECTOR
–Do not drop or bump the projector, otherwise damages
or malfunctions may result.
–When carrying the projector, use a suitable carrying
case.
–Do not transport the projector by using a courier or
transport service in an unsuitable transport case. This
may cause damage to the projector. To transport the
projector through a courier or transport service, consult
your dealer for their information.
– Do not put the projector in a case before the projector
is cooled enough.