Setting - Sanyo PLC-XE30 Owner's Manual

Setting

Setting
This projector has Setting menu that allows you to set up
the other various functions described as follows;
1 Press the MENU button to display the On-Screen
Menu. Press the Point
framed pointer to the Setting Menu icon.
2 Press the Point
pointer to the item that you want to set and then press
the SELECT button. The Setting dialog box appears.
Language
The language used in the On-Screen Menu is available in
English, German, French, Italian, Spanish, Portuguese,
Dutch, Swedish, Finnish, Polish, Hungarian, Romanian,
Russian, Chinese, Korean, or Japanese.
Keystone
This function corrects distortion of a projected image.
Select either Store or Reset with the Point
then press the SELECT button. The keystone dialog box
will appear. Correct keystone with the Point
(p23)
Store .........store the keystone correction even when the
AC power cord is unplugged.
Reset ........reset the keystone correction when the AC
power cord is unplugged.
Blue back
Press the Point
7 8
function is "On," a blue image is displayed while the input
signal is not detected.
Display
Press the Point
7 8
decides to display On-Screen Displays.
On .........................Show all the On-Screen Displays. Use
Countdown off ......Show the input image instead of the
Off .........................Do not show On-Screen Displays.
●
On-Screen Menu
●
"Power off?" message
● P-Timer
●
"No signal" message for Power management item (p45)
● "Please wait..." message
●
White arrows for True item in the Screen Menu (p33)
42
buttons to move the red
7 8
ed buttons to move the red framed
7 8
buttons to switch On/Off. When this
buttons to switch On/Off. This function
this function when you want to project
images after the lamp becomes bright
enough. Factory default setting is this
mode.
countdown when turning on the
projector. Use this function when you
want to project the image as early as
possible even when the lamp is not
bright enough.
except;
http://www.pureglare.com.au
Setting Menu (Language)
buttons, and
ed buttons.
Set the red framed Setting Menu
pointer to the item icon
and press the
SELECT button.
Press the SELECT button at
Language item, the
Language Menu will appear.
Press the SELECT
button at this item to
display the other
languages.
Press the SELECT
button at this item to
close the dialog box.