Auto Pc Adjustment - Sanyo PLC-XE30 Owner's Manual

Computer Input

Auto PC Adjustment

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to
conform to your computer. Auto PC Adjustment function can be operated as follows.
Direct Operation
The Auto PC adjustment function can be operated directly by
pressing the AUTO PC button on the remote control unit.
Menu Operation
Auto PC Adj.
1 Press the MENU button to display the On-Screen
Menu. Press the Point
framed pointer to PC Adjust Menu item.
2
Press the Point
pointer to Auto PC Adj. item and then press the
SELECT button twice.
To store adjustment parameters
Adjustment parameters from Auto PC Adjustment can be
memorized in this projector. Once parameters are
memorized, the setting can be done just by selecting Mode
in the PC System Menu (p27). See "Store" on page 30.
✔
Note:
• Fine sync, Total dots, Horizontal, and Vertical of some computers
cannot be fully adjusted with this Auto PC Adjustment function.
When the image is not provided properly with this operation,
manual adjustments are required. (p29, 30)
• The Auto PC Adjustment cannot be operated when 480i, 575i,
480p, 575p, 720p,1035i, or 1080i is selected in the PC System
Menu(p27)
28
buttons to move the red
7 8
ed buttons to move the red framed
http://www.pureglare.com.au
Remote Control Unit
AUTO PC button
PC Adjust Menu
PC Adjust Menu icon
Move the red framed
pointer to the Auto PC Adj.
item and press the SELECT
button.
"Please wait..." message
will appear while Auto PC
adjustment is in process.