Computer System Selection - Sanyo PLC-XE30 Owner's Manual

Computer System Selection

This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA or
UXGA with its Multi-scan system and Auto PC Adjustment. If Computer is selected as a signal source, this
projector automatically detects the signal format and tunes to project a proper image without any additional
setting. (Signal formats provided in this projector is shown on page 63 )
One of the following messages may appear when:
The projector cannot recognize the connected
Auto
signal conforming to the provided PC Systems.
The message "Auto" will be displayed on the PC
System Menu icon and the Auto PC Adjustment
function will work to display proper images. If
the image is not projected properly, a manual
adjustment is required. (p29, 30)
There is no signal input from computer. Check
-----
the connection between your computer and the
projector. (See " Troubleshooting" p58)
The preset system is manually adjusted in the
Mode 1
PC Adjust Menu. The adjusted data can be
stored in Mode 1~5. (p29, 30)
PC Systems provided in this projector is chosen.
SVGA 1
The projector chooses a proper system provided
in the projector and displays it.
*Mode 1 and SVGA 1 are examples.
Selecting Computer System Manually
PC system can also be selected manually.
1 Press the MENU button to display the On-Screen
Menu. Press the Point
framed pointer to the PC System Menu icon.
2
Press the Point ed
pointer to the system that you want to set, and then
press the SELECT button.
buttons to move the red
7 8
buttons to move the red arrow
http://www.pureglare.com.au
PC System Menu
The Auto PC Adjustment
function operates to adjust
the projector.
PC System Menu
The PC System Menu icon
Selected system is
displayed.
Systems on this dialog box
can be selected.
Custom Mode (1~5) set in the
PC Adjust Menu. (p28, 30)
Computer Input
27