Connecting To Component Video Equipment - Sanyo PLC-XE30 Owner's Manual

Installation

Connecting to Component Video Equipment

Cables used for connection
• Audio Cables (Mini Plug :stereo) ✽
• Scart-VGA Cable ✽
• Component Cable ✽
• Component-VGA Cable ✽
(✽ = Not supplied with this projector.)
Audio Output
Audio cable ✽
(stereo)
USB
RESET
✔
Note:
• When connecting AUDIO OUT to external audio equipment, the
projector's built-in speaker is disconnected.
• See p65 for ordering optional parts.
When connecting the cable, the power cords of both the
projector and the external equipment should be
disconnected from AC outlet.
18
RGB Scart 21- Component Video Output
pin Output (Y, Pb/Cb, Pr/Cr)
Scart-VGA
cable ✽
COMPUTER IN 1/ COMPONENT IN
COMPUTER IN 2 /
SERVICE PORT COMPUTER IN 1 MONITOR OUT
/ COMPONENT IN
COMPUTER/
COMPONENT
AUDIO IN
http://www.pureglare.com.au
Component
cable✽
Component-VGA
cable✽
(VARIABLE)
AUDIO OUT
AUDIO OUT
R
(stereo)
COMPUTER /
L
VIDEO IN
COMPONENT
(MONO)
S-VIDEO IN
AUDIO IN
External Audio Equipment
Audio Input
Audio cable ✽
(stereo)