Screen Size Adjustment - Sanyo PLC-XE30 Owner's Manual

Store
To store the adjusted data, select Store and press the
SELECT button. Select a level from Image 1 to 4 with the
Point ed buttons and press the SELECT button. A
confirmation box will appear and then select [Yes].
Stored data can be called up by selecting "Image" in the
Image Level Selection on page 31.
Quit
Exit the Image Adjust Menu.

Screen Size Adjustment

This projector has the picture screen resize function, which enables you to customize the image size.
1 Press the MENU button to display the On-Screen
Menu. Press the Point
framed pointer to the Screen Menu icon.
2 Press the Point buttons and move the red framed
ed
pointer to the function that you want to select and
then press the SELECT button.
Normal
Provide the image to fit the screen size.
True
Provide the image in its original size. When the original
image size is larger than the screen size (1024 x 768), this
projector enters panning mode automatically. Pan the
7 8 buttons. When adjusted, the
image with Point ed
arrows will turn red. When reached to the correction limit,
the arrows will disappear.
Wide
Provide the image to fit wide video aspect ratio (16 : 9) by
expanding the image width uniformly. This function can be
used for providing a squeezed video signal at 16 : 9.
Full screen
Provide the full screen image.
buttons to move the red
7 8
http://www.pureglare.com.au
Move the red framed
pointer to any of
Image 1 to 4 where
you want to set and
then
SELECT button.
Store item
Press the SELECT button
at this item to store the
adjusted data.
Screen Menu
Move the red
framed pointer to the
function and press the
SELECT button.
✔
Note:
• This Screen Menu cannot be operated when
720p(HDTV), 1035i (HDTV), or 1080i (HDTV)
is selected in the PC System Menu (p27).
• PLC-XE30 cannot display any resolution higher
than 1600 X 1200. If your computer's screen
resolution is higher than it, reset the resolution to
the lower before connecting to the projector.
•The image data in other than 1024 x 768 is
modified to fit the screen size in initial mode.
• True, Full screen, and Digital zoom +/– cannot
be selected when 480i, 575i, 480p, or 575p is
selected in the PC System Menu (p27).
Computer Input
press the
The confirmation
box will appear,
then select [Yes].
Screen Menu icon
33