Image Level Selection - Sanyo PLC-XE30 Owner's Manual

Video Input

Image Level Selection

Direct Operation
Select a desired image level among Dynamic, Standard,
Cinema, Blackboard (Green), Image 1, Image 2, Image 3,
and Image 4 by pressing the IMAGE button on the remote
control.
Dynamic
Picture level suitable for viewing picture in a bright room.
Standard
Normal picture level preset on this projector.
Cinema
Picture level adjusted for the picture with fine tone.
Blackboard(Green)
Picture level suitable for the image projected on a
blackboard.
This mode assists to enhance the image projected on a
blackboard. This is mainly effective on a green colored
board, not truly effective on a black colored board.
Image 1~4
User preset image in the Image Adjust Menu (p39, 40).
Menu Operation
1 Press the MENU button to display the On-Screen
Menu. Press the Point
framed pointer to the Image Select Menu icon.
2
Press the Point
pointer to the level that you want to set and then press
the SELECT button.
Dynamic
Picture level suitable for viewing picture in a bright room.
Standard
Normal picture level preset on this projector.
Cinema
Picture level adjusted for the picture with fine tone.
Blackboard(Green)
Picture level suitable for the image projected on a
Blackboard. See above for further description.
Image1~4
User preset image in the Image Adjust Menu (p39, 40).
38
buttons to move the red
7 8
ed buttons to move the red framed
http://www.pureglare.com.au
Remote Control
IMAGE
button
Image Select Menu
Move the red framed pointer to a
level and press the SELECT
button.
The level being selected.
IMAGE button
Dynamic
Standard
Cinema
Blackboard (Green)
Image 1
Image 2
Image 3
Image 4
Image Select
Menu icon