Using Pictures From Your Usb Device As A Screensaver - Avaya one-X 9621G User Manual

Using USB Flash Drives with your phone

Using pictures from your USB device as a screensaver

About this task
If your USB device has a top level directory named \Pictures or another picture directory
that is properly administered, you can use pictures in that directory as your phone's
screensaver. The pictures from the USB device are displayed as a screensaver only when the
USB drive is inserted and the phone is kept idle. Each picture displays for 5 seconds unless
you specify a different value (from 5 seconds to 999 seconds). The 9621G IP and 9641G IP
deskphones can display pictures with a resoultion of 480 x 272 pixels. The picture file must be
in JPEG format. Your administrator can enable this feature. If your administrator has disabled
this feature, the My Pictures option will not appear on the Home screen.
In addition to the features described in the
™
one-X Deskphone USB Companion application includes a utility program to convert your
pictures to the correct format.
Procedure
1. Plug the USB device into the jack near the center top edge of your phone.
2. Press Home.
3. Select My Pictures to immediately begin displaying the pictures from your USB
®
68 Avaya one-X Deskphone H.323 9621G and 9641G User Guide
picture directory on the phone and then whenever the screen display "times out"
after the administered idle period.
Note:
If you disconnect the USB device from the deskphone, the standard screensaver
replaces your pictures after the designated idle period.
Comments? infodev@avaya.com
Introduction to this chapter on page 65, the Avaya
December 2012