Optical System - Hitachi KP-F1 Technical Operation Manual

2) Signal connection to LENS (trigger) connector (6 pins)
Pin
No.
1 FLD pulse output
2 WEN pulse output
3 GND
4 Trigger C input (SYNC N.R. only)
5 Auto iris video output
6 +12 volts DC
Note:
• The FLD pulse is not output in the field-on-demand function.
• The auto iris video output function cannot be used when using the field-on demand function.
• FLD and WEN pulse output is CMOS level.
• Strobe is inhibited in the Low period of the WEN pulse.
Plug:
LENS (trigger)
Type: Hirose HR10A-7P-6P(01)
Part Code: JMH0092

7. Optical System

• Image size: ½ inch
• The flange focal distance is 17.526mm (in air).
• Flange focal distance is not adjustable.
Note:
When selecting a lens, the length (A)
from the flange surface to the end of
the screw mount must be 8mm or
less. If the length exceeds 8mm
damage can occur to the lens or
optical filter in the camera.
Signa
l
12