Specifications - Hitachi KP-F1 Technical Operation Manual

Specifications

3.
Imaging device
No. of total pixels
Pixel Pitch
No. of effective pixels
Sensing area (1/2 inch size)
Signal Format
Lens Format
Flange focal distance
Hor. Scanning frequency
Vert. Scanning frequency
Sync System
Internal sync operation
External sync input
Video Output
Resolution
Sensitivity
Minimum illumination
Signal-to-noise ratio
Electronic shutter
Interline CCD
EIA:
CCIR: 823 (H) x 592 (V)
EIA:
CCIR: 8.3 (H) x 8.3 (V)µm
EIA:
CCIR: 782 (H) x 582 (V)
EIA:
CCIR: 6.49 (H) x 4.83 (V) mm
Conforming to EIA / CCIR (Normal Mode)
C-Mount
17.526 mm (not adjustable)
EIA:
CCIR: 15.625 KHz
EIA:
CCIR: 50 Hz
Internal / external (automatically switchable)
2 : 1 interlaced / non-interlaced
HD / VD 2 to 6 Volts p-p negative
Input impedance: 1k ohm
Frequency deviation: ±1%
1.0 Volt p-p, 75 ohm unbalanced
Video: 0.7 Volt p-p Sync: 0.3 Volt p-p, negative
EIA: 500 TVL (H) x 485 TVL (V)
CCIR: 580 TVL (H) x 575 TVL (V)
400 lux f4.0, 3200 K
3 lux f1.4, AGC = on, Gamma = on, no IR cut filter
60db
1/10,000, 1/4000, 1/2000, 1/1000, 1/500,
1/250, 1/125, 1/100 (1/120 CCIR) External
switch selectable. OFF mode: Normal
exposure (factory setting)
692 (H) x 504 (V)
9.9 (H) x 9.9 (V) µm
659 (H) x 494 (V)
6.52 (H) x 4.89 (V) mm
15.734 KHz
59.94 Hz
6