Network; Ip Setting - Brickcom FD-100A Series User Manual

Network

IP Setting

This section explains how to configure wired network connection for the Network Camera.
There are several ways to setup the Network Camera over the
obtain an available dynamic IP address assigned by a DHCP server.
utilize a static IP. The third way is to use PPPoE.
DHCP - Get IP address automatically. Select this option to obtain an available
dynamic IP address assigned by a DHCP server each time the camera is connected
to the LAN.
Static IP - Select this option to manually assign a static IP address to the Network
Camera. Enter the static IP address, Subnet mask, Default Gateway, Primary and
Secondary DNS provided by your ISP.
PPPoE - (Point-to-point over Ethernet): Choose this connection type if you are
connected to the Internet via a DSL Line. Note that to utilize this feature, it requires an
account provided by your ISP. Enter the user name and password provided by your
ISP.
Click Apply or Reset to take effect.
34
Internet. The first way is to
The second way is to