Brickcom FD-100A Series User Manual page 14

The reset button is used to reset the system or restore the factory default settings. Sometimes
resetting the system can return the camera to normal operation. If the problems remain after
reset, please restore the factory settings and install it again.
Reset: Please press and release the indented reset button within 1 second with paper clip or
thin object. Wait for the network camera to reboot.
Restore: Please press and hold the reset button over 10 seconds then release. Please note
that all settings will be restored to factory default. Upon successful restore, the Power LED will
be green and Link LED blinking orange during normal operation.
7
7